您的当前位置:主页 > 验厂消防指引

配电柜

  用电安全导则 GB/T 13869-2008
  
  安全 电器 电线 用电
  
  用电安全导则 GB/T 13869-2008
  
  6.7 用电产品的电气线路须具有足够的绝缘强度、机械强度和导电能力并应定期检查。
  
  6.8 移动使用的用电产品, 应采用完整的铜芯橡皮套软电缆或护套软线作电源线; 移动时,应防止电源线拉断或损坏。
  
  7.3 用电产品拆除时, 应对原来的电源端作妥善处理, 不应使任何可能带电的导电部分外露。
  
  General Guide for Safety of Electric User (GB/T 13869-2008)
  
  6.7 The electric circuits of electrical products must have adequate insulating strength, mechanical strength and conductivity, and shall be subject to periodic inspection.
  
  6.8 As for the mobile electrical products, complete copper core rubber sleeve flexible cables or sheath cords shall be used as the power lines; the movement of electrical products shall be prevented from pulling apart or damaging the power lines.
  
  7.3 Upon dismantlement of electrical products, the original power ends shall be treated carefully, so as to ensure that no charged conductive part is exposed.



       验厂中对电箱的要求:

      1、要有闪电标识。

      2、要有绝缘护板。

      3、最好要能上锁。
  
      4、由专人负责检查并记录。

      5、大的配电柜需要有绝缘垫。

      6、需标明各开关按钮的用途。

      7、下图供参考: